Tag: ,

Capricorn C803 shorter rear driveshafts

Capricorn RC have introduced new shorter rear driveshafts for the C803 1/8 on-road car. These new rear driveshafts are 1.5mm shorter than the standard ones, so as to...

Capricorn RC C803 Pro chassis plate

Capricorn RC have introduced the new chassis plate for the C803 1/8 on-road car. Stiffer in the rear part, on the other side the chassis features more open cuts in the...

Capricorn RC C803 front bumper

Capricorn RC have introduced a new front bumper for their C803 1/8th car. Featuring a higher rib in its rear part that confers an increased stiffness, the bumper now...

Capricorn C803 front differential

Capricorn RC have introduced a front differential for their 1/8th scale car C803. Conceived for low grip conditions, the differential gives a different feeling and...

Capricorn C803 +1mm rear shocks

New from Capricorn are a pair of longer rear shock cases and shafts for their C803 1/8th on-road car. The 1mm greater length in both the shock shaft and the case allows...

Capricorn C803 front upper arm mounts

Capricorn have introduced a new set of front upper arms mounts for their C803. The new mounts are 1.5mm higher than the standard version. This makes so that the lower...

Capricorn C803 aluminium servo saver arm

New from Capricorn is a new aluminium servo saver arm for their C803 1/8 car. The new arm doesn’t offer anymore the chance to adjust its length so as to simplify the...

Capricorn C803/C03 86g under LiPo tungsten weight

Capricorn RC have introduced a new tungsten under LiPo weight. Functioning as RX battery support, the under LiPo weight is conceived to work on both che C803 and the C03...

Capricorn C803 Nickel treated wheel axes shims & 2.7mm rear anti-roll bar wire

Capricorn have introduced two optional parts dor the C803 in the form of a nickel treated and aluminium wheel axle shims. The aluminium wheel axle shims are precision...

Capricorn C803 Sapporo bearing kits

Capricorn RC have introduced the new Sapporo ball bearing set for their C803 1/8th car. This set of 18 high quality, made in Japan ABEC X bearings has been put together...