Team Associated RC10F6 Factory Team option parts

249

Team Associated have introduced five Factory Team option parts for the RC10F6. First up is the adjustable caster top plate made from graphite allow infinite caster adjustment between 0 and 12 degrees for fine tuning of caster angle and resulting handling characteristics. This tuning option is available now.

Next up is the suspension arm brace also machined from graphite increases stiffness of lower front arm assembly. M3x5 set screw (not included) can be used in one of four possible positions to further increase lower arm stiffness by varying degrees. To use the tuning option one of each packages to follow is required:

  • #31386 Bulkhead Washers, qty 2 of 7.8×2.0 mm, blue aluminum
  • #89219 Set Screws, qty 2 of 3×5 mm
  • #89202 Screws, 3×12 mm BHCS or 91583 FT Titanium Screws, 3×12 mm BHCS

The suspension arm brace is available now.

Also next are the HD front top plate standoffs, machined from 7075-T6 aluminum, these option parts replace parts #8653 and 8654 for greater durability and offer increased section thickness. They are sold in pair and will be available in January 2018.

The HD suspension arm standoffs replace part 8651 for greater durability. These parts increased section thickness and use 7075-T6 aluminum alloy material. They are sold in sets of 6pcs: 4pc used for arm mount, and 2pc for wing mount. The HD suspension arm standoffs are will be available in January 2018.

The next tuning options are the front wing shims, machined from graphite, they raise the front wing for proper clearance on bumpy track conditions. Coming in pair with 1pc 0.5mm thick and 1pc 1.0mm thick, they will be available in January 2018.

Team Associated