Creation Model have introduced new chassis conversion set for the Infinity 1/8 on-road car and a T-Shirt and a hoodie. The chassis conversion set consist of 5 mm chassis with a longer wheelbase of 1mm, specially designed for low grip track. The chassis weights about 176 grams and it is lighter than the 6 mm chassis inclued in the kit as standard whish weights about 220 grams. Also in the set is new servo saver shaft suitable to the new chassis and a 2.5mm thick carbon belt tensioner plate smaller and with a wider adjustement range on the upper side than the one included in the kit, two aluminum bulk spacer, a carbon belt tensioner plate, a side ruber belt soft by Mitsuboshi and the hardware required for assembly.
Creation Model also offer long-awaited aluminum servo saver set as a tip adjustable in three level, versatile yellow shoe widens the clutch setting range, rear axle set designed to reduced the inertia mass. The pin-type axle is about 30 grams, which is lighter than the 35 grams axle included in the kit. Also new is the 2.5mm thick carbon battery plate, less rigid than the one included in the kit and better suited for low grip tracks, a 3mm thick carbon front shock stay wich allows to move the shock attachment position 1 mm outward and 1.5 mm downward. Finaly Creation Model introduced new soft ruber belts. They are made by Mitsuboshi which has a reputation for low friction belts. All belts rare the same than the ones included in the kit except the side belt included in the chassis set.
Last but not the least are the new apparels. The T-Shirt and the Hoodie are black featuring a large CM Creation Model in the center of the back and a smaller Infinity in the front side. These apparels are the same as the Infinity factory drivers.