Serpent have introduced new light weight rear polycarbonate wing for 1/8 buggies and truggies. Designed by Billy Easton, the rear wing is made from a strong 1mm clear polycarbonate. It feature large sideflaps for stability, maximum surface for the wing itself with 7 fins / ribs to add to the stability of the wing with a lowered left and right section with additional ribbing to guide the air towards the side-dams and guerney for added downforce and stability.
The wing comes with a seperate clear polycarbonate center section which bolts on the main wing with 2 screws in the top ( which keep the gurney down if applied ) and wit the 2 wing button-screws . The use of the center section is optional, but adds stability and downforce if needed. The supplied composite guerney can be bolted on the main wing to gain more downforce. The whole wing comes pre-cut and with the hardware and only needs simple assembly.