Losi 8IGHT-T 1/8 RTR Nitro Truggy



Losi have introduced the new 8IGHT-T 1/8 RTR Nitro Truggy. This RTR nitro truggy is based on the 8IGHT buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box. The Losi 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with a Dynamite .28 nitro engine and a Spektrum DSMR® radio system.

You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle’s performance with many of the 8IGHT-T option parts currently available.

The vehicle comes equipped with a Spektrum ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too. A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don’t have to buy a starter box to get racing right away. A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions. These eliminate the friction of a CV coupler and improve bump handling in the rear of the car. The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.


  • 4mm T-6 aluminum chassis plate
  • Spektrum™ ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Metal-gear transmission and sealed differentials
  • Pre-set suspension geometry
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum™ waterproof metal-gear servo
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

Product Specifications

  • Type:Nitro Truggy
  • Scale:1/8
  • Length:18.75 in (476mm)
  • Width:16.38 in (416.1mm)
  • Height:7.30 in (185.5mm)
  • Wheelbase:14.93-15.09 in (379-383mm)
  • Chassis:4mm Plate, Aluminum
  • Suspension:4-wheel Independent
  • Drivetrain:4WD
  • Tire Type:Losi XTT
  • Motor or Engine:Dynamite .28 Nitro Engine
  • Radio:DX2E
  • Servos:Included
  • Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
  • Gear Pitch:1.0Mod
  • Kit/RTR:RTR
  • Shock Type:15mm bore, Composite
  • Body:Painted/Screened
  • Ball Bearings:Full Precision Ball Bearings
  • Fuel Tank Capacity:150cc
  • Experience Level:Beginner
  • Recommended Environment:Outdoor
  • Completion Guides

8ight-t-rtr-nitro-truggy-58ight-t-rtr-nitro-truggy-88ight-t-rtr-nitro-truggy-18ight-t-rtr-nitro-truggy-28ight-t-rtr-nitro-truggy-6 8ight-t-rtr-nitro-truggy-78ight-t-rtr-nitro-truggy-3 8ight-t-rtr-nitro-truggy-4